EIM Submersible Pumps for Sumps - Model SUK (For Waste/Dirty Water Closed Loop Cooling Arrangement)
Submersible pumps for waste/dirty water handling internal motor cooling allows for continuous run dry operation
Features:
- Efficient closed loop motor cooling system allows for dry operation
- Motor cooling loop is completely isolated from pumping fluid
- Prevent protection against possible trouble
- Non-clogging centrifugal impeller are standard
- EIM also can provide the following option upon request
- Vortex impeller
- Screw centrifugal impeller
Specifications
| Model | Discharge | No. of Poles | Motor Output | Rated Head | Rated Flow | Solid Handing | Power Cable | Weight | |||||
| Free Standing | Ebow Assembly | mm | inch | kW | HP | m | ft | m3/min | l/s | mm | mm2×Core×Length(m) | kg | |
| SUK-88E | SUK-88B | 80/65* | 3 | 4 | 5.5 | 8 | 20 | 66 | 0.6 | 10.0 | 29 | 3.5×4×8 | 180 |
| SUK-810E | SUK-810B | 4 | 7.5 | 10 | 25 | 82 | 0.6 | 10.0 | 29 | 5.5×4×8 | 190 | ||
| SUK-815ED | SUK-815DB | 4 | 11 | 15 | 25 | 82 | 1.0 | 16.7 | 29 | 5.5×3,4×8 | 290 | ||
| SUK-820ED | SUK-820DB | 4 | 15 | 20 | 30 | 98 | 1.2 | 20.0 | 29 | 14×3,4×8 | 300 | ||
| SUK-108E | SUK-108B | 100 | 4 | 4 | 5.5 | 8 | 10 | 33 | 1.5 | 25.0 | 34 | 3.5×4×8 | 180 |
| SUK-1010E | SUK-1010B | 4 | 7.5 | 10 | 15 | 49 | 1.5 | 25.0 | 34 | 5.5×4×8 | 190 | ||
| SUK-158E | SUK-158BH | 150 | 6 | 4 | 5.5 | 8 | 6 | 20 | 2.0 | 33.3 | 55 | 3.5×4×8 | 190 |
| SUK-1510E | SUK-1510BH | 4 | 7.5 | 10 | 10 | 33 | 2.5 | 60 | 5.5×4×8 | 200 | |||
| SUK-1515ED | SUK-1515DBH | 4 | 11 | 15 | 15 | 49 | 2.5 | 44 | 5.5×3,4×8 | 300 | |||
| SUK-1520ED | SUK-1520DBH | 4 | 15 | 20 | 15 | 49 | 3.0 | 50 | 44 | 14×3,4×8 | 310 | ||
| SUK-1530ED | SUK-1530DB | 4 | 22 | 30 | 20 | 66 | 3.0 | 50 | 35 | 14×3,4×8 | 670 | ||
| SUK-2015ED | SUK-2015DBH | 200 | 8 | 4 | 11 | 15 | 10 | 33 | 4.0 | 66.7 | 55 | 5.5×3,4×8 | 330 |
| SUK-2030ED | SUK-2030DBH | 4 | 22 | 30 | 15 | 49 | 5.0 | 83.3 | 55 | 14×3,4×8 | 700 | ||
| SUK-2040ED | SUK-2040DBH | 4 | 30 | 40 | 18 | 59 | 5.0 | 83.3 | 55 | 22×3,4×8 | 750 | ||
| SUK-2050ED | SUK-2050DBH | 4 | 37 | 50 | 22 | 72 | 5.0 | 83.3 | 55 | 22×3,4×8 | 750 | ||
| SUK-2060ED | SUK-2060DBH | 4 | 45 | 60 | 30 | 98 | 5.0 | 83.3 | 55 | 38×3,4×8 | 1,000 | ||
| SUK-3050ED | SUK-3050DB1B | 300 | 12 | 6 | 37 | 50 | 15 | 49 | 8.0 | 141.7 | 75 | 22×3,4×8 | 1,100 |
| SUK-3550ED | SUK-3550DB1B | 350 | 14 | 6 | 37 | 50 | 10 | 33 | 14.0 | 233.3 | 75 | 22×3,4×8 | 1,150 |
| SUK-4060ED | SUK-4060DB1B | 400 | 16 | 6 | 45 | 60 | 9.5 | 31 | 18.0 | 300 | 75 | 38×3,4×8 | 1,300 |
| SUK-50100ED | SUK-50100DB1B | 500 | 20 | 8 | 75 | 100 | 10 | 33 | 30.0 | 500 | 85 | 38×3,4×8 | 2,500 |
| SUK-60220ED | SUK-60220DB1B | 600 | 24 | 8 | 160 | 220 | 11 | 36 | 60.0 | 1,000 | 100 | 100×3,4×8 | 4,000 |
- A motor protector (bimettalic auto cut) is installed for motors under 7.5kW.
- Thermal protection for motor windings and a water penetration detector are standard equipment.
- Mark * shows availability of discharge sizes, on request.
- Weight indicates the values of free-standing type.
- Power cable : 2PNCT