EIM General Purpose Submersible Pumps - Model K: General Purpose (For Sand)
Powerful pumping and dewatering of slurry, sludge and sand
Features:
- With agitating blades.
- Abrasion-resistant high-chrome iron casting mode impeller.
- As water cooling jacket system which is provided in the outside stator housing, operating in very low water level is also available.
Specifications
Model | Discharge | No. of Poles | Motor Output | Rated Head | Rated Flow | Power Cable | Weight | |||||
mm | inch | kW | HP | m | ft | m3/min | l/s | mm2×Core×Length(m) | kg | |||
KH-55-2K | Hose Connection | 50/80* | 2/3* | 2 | 3.7 | 5 | 25 | 82 | 0.35 | 5.8 | 2.0×4×15 | 110 |
KH-55-2EK | Flange Connection | |||||||||||
EL-85K | Hose Connection | 80/100* | 3/4* | 4 | 3.7 | 5 | 12 | 39 | 0.5 | 8.3 | 3.5×4×10 | 140 |
EL-85EK | Flange Connection | |||||||||||
EL-108K | Hose Connection | 100/80* | 4/3* | 4 | 5.5 | 8 | 12 | 39 | 1.0 | 16.7 | 3.5×4×10 | 150 |
EL-108EK | Flange Connection | |||||||||||
BD2-1015K | Hose Connection | 4 | 11 | 15 | 30 | 98 | 0.6 | 10.0 | 14×4×15 | 320 | ||
BD2-1015EK | Flange Connection | |||||||||||
BD2-1515K | Hose Connection | 150/200* | 6/8* | 4 | 11 | 15 | 12 | 39 | 2.0 | 33.3 | 14×4×10 | 300 |
BD2-1515EK | Flange Connection | |||||||||||
BD3-1525K | Hose Connection | 4 | 19 | 25 | 25 | 82 | 2.0 | 33.3 | 22×4×15 | 420 | ||
BD3-1525EK | Flange Connection | |||||||||||
BD3-2025K | Hose Connection | 200/150* | 8/6* | 4 | 19 | 25 | 12 | 39 | 4.0 | 66.7 | 22×4×10 | 430 |
BD3-2025EK | Flange Connection |
- A motor protector (bimettalic auto cut) is installed for motors under 11kW.
- Mark * shows availability of discharge sizes, on request.
- EIM can provide thermal protection for motor windings and a water penetration detector on request.(Model BD only).
- Power cable : 3CT